Denon AVR-3805 User Manual

82
Tone control setting
• Use the tone control setting to adjust the bass and treble as desired.
• Operate the tone control from the remote control unit.
1
Press the surround parameter
button.
Display the surround parameter
screen.
The screen selected surround
mode appears.
“TONE” cannot be selected in
the Direct mode.
6
1, 7
2~5
2
Select “TONE”.
CH SEL
ENTER
3
Display the Tone Control screen.
CH SEL
ENTER
5
CH SEL
ENTER
6
Enter the setting.
The surround parameter menu
screen reappears.
CH SEL
ENTER
Select Bass or Treble. Set the level.
CH SEL
ENTER
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
ROOM: Medium
*Surr Parameter
TONE
*Surr Parameter
4
Display the Tone Control screen.
Select Tone Defeat OFF.
CH SEL
ENTER
(Remote control unit)
TONE Def.: ON
*Tone Control
7
If the setting ends, press the surround
parameter button again.
(Remote control unit)

Denon AVR-3805 Specifications

General

Receiver type	Surround
Frequency range	10 - 100000 Hz
Speaker selector	A / B
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	7.1 channels
Signal-to-Noise Ratio (SNR)	102 dB
Total Harmonic Distortion (THD)	0.05 %
Power output per channel (1KHz@6 Ohm)	160 W
Power output per channel (20-20KHz@8 Ohm)	120 W
AC input voltage	120 V
AC input frequency	60 Hz
AM band range	520 - 1710 kHz
FM band range	87.5 - 107.9 MHz
Supported radio bands	AM, FM
Preset stations quantity	56
HDMI in	0
Audio (L/R) in	11
Remote control in	1
Composite video in	7
Digital audio coaxial in	2
Digital audio optical in	5
Component video (YPbPr/YCbCr) in	3
AirPlay	No
Display	-
Product color	Black
Audio decoders	DTS 96/24, DTS Neo:6, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), Dolby Digital EX, Dolby Pro Logic IIx
Apple docking compatibility	Not supported
Speakers connectivity type	RCA

Weight and Dimensions

Depth	429 mm
Width	434 mm
Height	171 mm
Weight	17000 g