Denon AVR-990 User Manual


Getting Started Settings Playback Remote ControlZONE2 Information Troubleshooting Specifications
ENGLISH
Connecting Devices
Connecting the Recording Components
(/%
"6%*0
065
R
L
Turntable
(MM cartridge)
Record Player
The AVR-990 is compatible with record players with an MM cartridge.
When you connect to a record player with an MC cartridge, use a
commercially available MC head amp or a step-up transformer.
When you increase the volume without connecting the record player,
there may be “booming” noise from the speakers.
•
•
NOTE
The SIGNAL GND terminal of the AVR-990 is not a safety ground
connection. Connect it to reduce noise when noise is excessive.
Note that depending on the record player, connecting the ground line
may have the reverse effect of increasing noise. In this case, it is not
necessary to connect the ground line.
Video Cassette Recorder
Select the terminal to use and connect the device.
R
L
R
L
R
L
R
L
3-
065
"6%*0 7*%&0
"6%*0
3-
*/
"6%*0
"6%*0
065
7*%&0
47*%&0
065
7*%&0
*/
7*%&0
47*%&0
*/
Video cassette recorder
NOTE
To record video signals through the AVR-990, use the same type of
video cable for connection between the AVR-990 and the player as the
cable used for connection between the AVR-990 and the recorder.
Set this to change the input signal to which the input source is
assigned.
“Input Assign” (vpage 44)
Set as Necessary
For instructions on HDMI connections, see “Connecting Devices
Equipped with HDMI Terminals” on page 13.
R
L
R
L
"6%*0
"6%*0
3-
065
$0"9*"-
065
CD player
CD Player
Select the terminal to use and connect the device.
Set this to change the input signal to which the input source is
assigned.
“Input Assign” (vpage 44)
Set as Necessary
Connections

Denon AVR-990 Specifications

General

Brand	Denon
Model	AVR-990
Category	Stereo Receiver
Language	English