EasyManuals Logo
Home>Denon>Stereo Receiver>AVR-990

Denon AVR-990 User Manual

Denon AVR-990
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image

Getting Started Settings Playback Remote ControlZONE2 Information Troubleshooting Specifications
ENGLISH
If you have an Internet provider contract for a line on which network
settings are made manually, make the settings at “Network
Connecting” (vpage 37).
With the AVR-990, it is possible to use the DHCP and Auto IP
functions to make the network settings automatically.
When using the AVR-990 with the broadband router’s DHCP function
enabled, the AVR-990 automatically performs the IP address setting
and other settings.
When using the AVR-990 connected to a network with no DHCP
function, make the settings for the IP address, etc., at “Network
Connecting” (vpage 37).
The AVR-990 is not compatible with PPPoE. A PPPoE-compatible
router is required if you have a contract for a line of the type with
which the PPPoE is set.
Depending on the ISP with which you have your contract, it may be
necessary to make proxy server settings to use the Internet radio
function. If you made proxy server settings on the computer to
connect to the Internet, make the proxy server settings on the AVR-
990 in the same way.
Connecting Devices
When you connect the AVR-990 to a home network, you can enjoy
listening to music files stored on your PC, internet radio audio and
other sources. You can also control the AVR-990 from your PC via the
Web browser.
Required system
Broadband Internet connection
Modem
Router
When using the AVR-990, we recommend you use a router
equipped with the following functions:
Built-in DHCP server
This function automatically assigns IP addresses on the LAN.
Built-in 100BASE-TX switch
When connecting multiple devices, we recommend a switching
hub with a speed of 100 Mbps or greater.
Ethernet cable (CAT-5 or greater recommended)
Some flat type Ethernet cables are easily affected by noise.
We recommend using a normal type cable.
Computer
GRecommended systemH
OS :
Windows
®
XP Service Pack2 or later, Windows Vista
Software (Prepare one of the following.)
Windows Media Player ver.11
DLNA-compatible server software
Internet browser :
Microsoft Internet Explorer 6 or later
LAN port
300 MB or more free disk space
Operation is possible with DLNA servers other than the above,
but such DLNA servers are not supported. For details, check the
Web.
n
n
n
n
n
b
NOTE
A contract with an ISP is required to connect to the Internet.
No additional contract is needed if you already have a broadband
connection to the Internet.
The types of routers that can be used depend on the ISP. Contact an
ISP or a computer shop for details.
Depending on the server, video files may be displayed, but they
cannot be played on the AVR-990.
Internet
Modem
Computer
Router
For connections to the Internet, contact an ISP (Internet
Service Provider) or a computer shop.
To WAN side
LAN port/
Ethernet
connector
To LAN port
To LAN port
Connecting to a Home Network (LAN)
Connections

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-990 and is the answer not in the manual?

Denon AVR-990 Specifications

General IconGeneral
BrandDenon
ModelAVR-990
CategoryStereo Receiver
LanguageEnglish

Related product manuals