Denon AVR-990 User Manual


Getting Started Connections Settings Remote ControlZONE2 Information Troubleshooting Specifications
ENGLISH
Tuning in Radio Stations – SIRIUS Satellite Radio, HD Radio
“UPDATING” is displayed while the encording code is being
updated.
“SIRIUS UPDATING” is displayed when updating SIRIUS tuner
firmware.
Refer to “Troubleshooting” – “SIRIUS Satellite Radio” (vpage 99)
regarding other messages.
•
•
•
1
Tune to the channel you want to lock.
2
Press ENTER for at least 3 seconds.
“Enter Lock Code” is displayed.
3
Enter the 4-digit lock code using uio p.
When you enter the correct code, the corresponding channel
is locked.
4
Press ENTER.
Channels under Parental Lock cannot be tuned in by performing
Tuning Up/Down or by category search.
Channels stored in preset memory can be tuned in by the preset
channel select operation, even if Parental Lock is applied.
When a channel to which Parental Lock is applied is being played,
Parental Lock for that channel is cancelled by performing step 2.
See “Edit Lock Cord” (vpage 50) for the method of changing
Parental Lock Cord.
You can also set “Parental Lock” (vpage 50) from the menu.
•
•
•
•
•
Parental Lock
1
Press o p.
S R 0 0 1 H i t s 1
C A T : P o p s
2
Use o p to select the category, to use ui to select
the desired channel.
Channel category
Searching Categories
If the desired station cannot be tuned in with auto tuning, tune it in
manually.
When tuning in stations manually, press and hold [TUNING] to
change frequencies continuously.
The time (default : 30 sec) for which the GUI menu is displayed can
be set “GUI” – “Tuner” (vpage 41). Press uio p to return to
the original screen.
•
•
•
Listening to HD Radio Stations
1
Set [DEVICE SELECT 1] to “MAIN/TV” and [DEVICE
SELECT 2] to “MAIN”.
2
Press [SOURCE SELECT] to display the GUI Source
Select menu, then select “ ” (vpage 26).
3
Press [BAND] to select “FM” or “AM”.
4
Tune in the desired broadcast station.
q To tune in automatically (Auto Tuning)
Press [MODE] to select “HD-AUTO” or “AUTO”, then use
[TUNING] to select the station you want to hear.
The “ ” indicator lights on the display when an HD Radio
station is tuned in.
When “HD-AUTO” (tuning mode) is selected, only HD Radio
stations are tuned in.
If “AUTO” (tuning mode) is selected, both HD Radio and analog
stations are tuned in.
w To tune in manually (Manual Tuning)
Press [MODE] to select “MANUAL”, then use [TUNING].
•
•
•
5
Adjust the items below.
Adjusting the master volume (vpage 65)
Selecting the surround mode (vpage 67)
Adjusting the Sound and Picture Quality
(vpage 69)
n
n
n
Button located on both the main unit
and the remote control unit BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control unit [BUTTON]
Symbols used to indicate buttons in this manual
Playback
uio p
<STATUS>
<TUNING PRESET>
<SOURCE SELECT> ENTER
[DEVICE
SELECT 1]
[DEVICE
SELECT 2]
[SOURCE
SELECT]
[SHIFT]
[MEMORY]
[DTU]
[SAT TU]
[TUNING]
[CHANNEL]
ENTER
uiop
[TUNING]
[MODE]
[DTU]
[BAND]
[SAT TU]
Front Rear

Denon AVR-990 Specifications

General

Brand	Denon
Model	AVR-990
Category	Stereo Receiver
Language	English