Denon AVR-X4000 User Manual

138
Appendix
TipsSettingsConnections
Contents
Front panel Display Rear panel IndexRemote
Playback
Playback in ZONE
InstaPrevue
SOUND MODE
RC-1185
ZONE SELECT
FAVORITE STATION
TUNE TUNE
PUREMOVIE GAME
MUSIC
OPTIONINFO
BACK
SETUP
CH/ PAGE
ENTER
3
1
1 2 3 4
2 3
4 5 6
7 8 9
ENTER0+10
GHI
JKL
MNO
PQRS TUV
ABC. /
DEF
SLEEP
WXYZ
MAIN
DEV. TV AVR
POWER
TUNER
AVR
GAME
CBL /
SAT
Blu-ray
DVD
AUX1
AUX2
NETWORK
INTERNET
RADIO
iPod/
USB
MENU
MEDIA
PLAYER
CD
INPUT
TVDEVICE
MENU
PHONO
TV
AUDIO
VOLUME
MUTE
2
ZONE2
ZONE3
VOLUME
df
POWER
X
MUTE
:
Input source
select buttons
1
Press ZONE2 or ZONE3 to switch the zone mode.
•ZONE2 or ZONE3 lights.
2
Press POWER X to turn on the ZONE2 or ZONE3 power.
•Also press input source select button when in standby mode, the
power turns on.
•When POWER X is pressed, ZONE2 or ZONE3 turns o.
•Power in ZONE2 or ZONE3 can be turned on or o by pressing
ZONE2 ON/OFF or ZONE3 ON/OFF on the main unit.
3
Press the input source select button to select the input
source to be played.
The audio signal of the selected source is output to ZONE2 or
ZONE3.
•To perform an operation with the main unit, press ZONE2 SOURCE
or ZONE3 SOURCE.
Each time you press ZONE2 SOURCE or ZONE3 SOURCE, the
input source changes.
2 Adjusting the volume
Use VOLUME df to adjust the volume.
•At time of purchase, “Volume Limit” (vpage 194) is set to “70
(–10dB)”.
%
•Turn MASTER VOLUME after pressing ZONE2 SOURCE or ZONE3 SOURCE
on the main unit to adjust the sound volume.

Denon AVR-X4000 Specifications

General

Receiver type	-
Frequency range	10 - 100000 Hz
Output impedance	16 Ω
Speaker selector	A+B
Input sensitivity	200 mV
Audio output channels	7.2 channels
Signal-to-Noise Ratio (SNR)	102 dB
Total Harmonic Distortion (THD)	0.008 %
Power output per channel (1KHz@6 Ohm)	165 W
Power output per channel (20-20KHz@8 Ohm)	125 W
HDMI in	7
AC (power) in	Yes
Composite video in	4
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	2
Number of HDMI outputs	3
Connectivity technology	Wired
Speakers connectivity type	Banana connector
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Wi-Fi	No
RDS features	PTY, TP
FM band range	87.5 - 108 MHz
Supported radio bands	FM
Internet radio services supported	Spotify, vTuner
Supported video modes	1080i, 1080p, 480p, 576p, 720p
Display	VFL
Color depth	24 bit
Aspect ratio	4:3, 16:9
Product color	Silver
Audio decoders	Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), DTS-HD, DTS-HD Master Audio
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Apple docking compatibility	Not supported
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	670 W

Weight and Dimensions

Depth	379 mm
Width	434 mm
Height	167 mm
Weight	12300 g