66
Appendix
TipsSettingsConnections
Contents
Front panel Display Rear panel IndexRemote
Playback
4
Use o p to select “FM” or “AM”, then press ENTER.
FM : When listening to an FM broadcast.
AM : When listening to an AM broadcast.
5
Press TUNE + or TUNE – to select the station you want
to hear.
Scanning is performed until it finds an available radio station. When
it finds a radio station, it stops the scan automatically and tunes in.
%
•The modes for receiving FM broadcasts consists of “Auto” mode that automatically
searches available broadcast stations and “Manual” mode that lets you tune in
using buttons to change the frequency. The default setting is “Auto”. You can also
use “Direct Tune” to tune in by entering the frequency directly.
In “Auto” mode, you cannot tune in to radio stations if the reception is not good. If
this is the case, then use the “Manual” mode or “Direct Tune” to tune in.
Operation buttons Function
TUNE +, – Tuning (up/down) / Multicast switching
CH/PAGE df
Preset channel selection
0 – 9
Preset channel selection (1 – 8) /
Direct frequency tuning (0 – 9)
FAVORITE STATION
1 – 4
Call up favorite stations
(Press and hold)
Add to the favorite stations
2 Adding to the FAVORITE STATION button
(vpage99)
2 Operations available through the OPTION
button
•Tuning in by entering the radio frequency (Direct Tune) (vpage67)
•Presetting the current broadcast station (Preset Memory)
(vpage69)
•Changing the tuning mode (Tune Mode) (vpage67)
•Tuning in to radio stations and presetting them automatically (Auto
Preset Memory) (vpage70)
•Specify a name for the preset broadcast station (Preset Name)
(vpage70)
•Skipping preset broadcast stations (Preset Skip) (vpage71)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
