Denon AVR-X4000 User Manual

167
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
On Screen Display
Select the on-screen display user interface preferences.
2 Volume
Sets where to display the master volume level.
Bottom (Default) : Display at the bottom.
Top : Display at the top.
O : Turn display o.
%
•When the master volume display is hard to see when superimposed text
(closed captioning) or movie subtitles are present, set to “Top”.
2 Info
Displays status of operation temporarily when the sound mode is
changed, or input source is switched. You can set whether or not to
show each of these status displays.
On (Default) : Turn display on.
O : Turn display o.
2 Now Playing
Sets how long each menu is displayed when the input source is
“NETWORK”, “iPod/USB”, or “HD Radio”.
Always On (Default) : Show display continuously.
Auto O : Show display for 30 seconds after operation.
TV Format
Set the video signal format to be output for the TV you are using.
2 Format
NTSC (Default) : Select NTSC output.
PAL : Select PAL output.
%
•“Format” can also be set by the following procedure. However, the menu
screen is not displayed.
1. Press and hold the main unit’s
o p for at least 3 seconds.
“zVideo Format <NTSC>” appears on the display.
2. Use the main unit’s
o p and set the video signal format.
3. Press the main unit’s ENTER to complete the setting.
NOTE
•When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.

Denon AVR-X4000 Specifications

General

Receiver type	-
Frequency range	10 - 100000 Hz
Output impedance	16 Ω
Speaker selector	A+B
Input sensitivity	200 mV
Audio output channels	7.2 channels
Signal-to-Noise Ratio (SNR)	102 dB
Total Harmonic Distortion (THD)	0.008 %
Power output per channel (1KHz@6 Ohm)	165 W
Power output per channel (20-20KHz@8 Ohm)	125 W
HDMI in	7
AC (power) in	Yes
Composite video in	4
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	2
Number of HDMI outputs	3
Connectivity technology	Wired
Speakers connectivity type	Banana connector
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Wi-Fi	No
RDS features	PTY, TP
FM band range	87.5 - 108 MHz
Supported radio bands	FM
Internet radio services supported	Spotify, vTuner
Supported video modes	1080i, 1080p, 480p, 576p, 720p
Display	VFL
Color depth	24 bit
Aspect ratio	4:3, 16:9
Product color	Silver
Audio decoders	Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), DTS-HD, DTS-HD Master Audio
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Apple docking compatibility	Not supported
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	670 W

Weight and Dimensions

Depth	379 mm
Width	434 mm
Height	167 mm
Weight	12300 g