Denon HEOS User Manual

Setting up your first HEOS Bar
Once you have placed your HEOS Bar in your listening room and have downloaded the HEOS app, you are ready to configure your HEOS Bar for music
playback. This involves following a few simple steps to get the HEOS Bar connected to your existing home network:
Caution
0
DO NOT connect the Ethernet cable if you are connecting your HEOS Bar to a wireless network. If you are connecting the HEOS Bar to a wired
network, use an Ethernet cable to connect the HEOS Bar to your network or router.
1
Make sure your mobile device is connected to your
wireless network (the same network you want your
HEOS Bar connected to).
You can check this in the Settings - Wi-Fi menu of your iOS or
Android device.
NOTE
0
If your wireless network is secure, make sure you know the password to join
your network.
2
Make sure you have the included 1/8
inch (3.5 mm) setup cable handy.
3
Launch the HEOS app on your
mobile device.
4
Tap the “Setup Now” button at the top of the screen.
5
Follow the instructions to add the HEOS Bar to your
wireless network.
The Wi-Fi settings from your mobile device will be copied to the
HEOS Bar via the audio cable.
NOTE
0
If you have any problems connecting your HEOS device, jump to the
Troubleshooting section. (v p. 62)
Contents Setup Use Troubleshooting Status LED Appendix
24

Denon HEOS Specifications

General

Product Type	Wireless Subwoofer
Auto EQ	Yes
App Control	HEOS App
Wireless Connectivity	Wi-Fi, Bluetooth
Inputs	Wireless