DENT Instruments powerscout 3037 User Manual

61
Modbus Offset Register Description
44599 4598 CT Phase Shift All CT Phase Shift X 100 +/-
Writes same value to Registers 50199, 50299, &
50399
44600 4599 CT Integer All Integer value of all CTs, Writes same value to
Registers 50100, 50200, & 50300
44601 4600 CT Decimal All Decimal value of all CTs, Writes same value to
Registers 50100, 50200, & 50300
44602 4601 Data Scalar
A Value of 0-6 that changes the scaling of certain
registers
44603 4602 Demand Window Size Demand window size in minutes; default is 15 min
44604 4603 Volts Multiplier Integer Multiply volts values by this scalar + Volts Multiplier
Decimal/1000. Use with Step-down Transformer.
Affects all parameters that use volts (i.e., kW)
44616 4615 Volts Multiplier Decimal Multiply volts values by (this scalar/1000+Volts
Multiplier Integer). Use with Step-down Transformer.
Affects all parameters that use volts (i.e., kW)
44605 4604 Amps Multiplier Multiply amps value by this scalar. For use with x:5A
CTs and single let monitoring of a three phase load.
Affects all parameters that use amps (i.e, kW)
44606 4605 Communication Setting Baud: 900=9600, 1900=19200, 3800=38400,
5700=57600, 7600 =76800, 11500=115200
Parity: Add 00 = NO, Add 10 = ODD, Add 20 = EVEN
Stop bit: Add 0 = 1 (UART does not permit 0 stop bits),
Add 1 = 1, Add 2 = 2
E.g., 901 = 9600 baud, no parity, 1 stop bit
44607 4606 Service Type A value of 0x0001 configures the meter for DELTA
A value of 0x0000 configures the meter for WYE
44609 4608 Set Line Frequency Line frequency setting for metering: 50=50 Hz,
60=60Hz
44610 4609 Snap Rog Threshold “Snap to Zero” threshold Rogowski CTs. Register value
is:
44611 4610 Snap Volt Threshold “Snap to Zero” threshold for voltage. Register value is
1x:
44612 4611 Communications Settings Write 1833 to change to BACnet mode
50100 10099 CT1 Integer Integer part of CT1
50101 10100 CT1 Decimal Fractional part of NV_CT1
50125 10124 CT1 Type Select 1=mV or 2=Rogowski CT1s
50199 10198 CT1 Phase Shift Phase Shift X 100 +/-
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

DENT Instruments powerscout 3037 Specifications

General

Brand	DENT Instruments
Model	powerscout 3037
Category	Measuring Instruments
Language	English