Dexter Laundry T-950 User Manual

8514-296-001 REV K page 67
4.7 Settings:
The “Settings” options allow for the user to make various programming changes to
change how the control operation affects the customer. See below for detailed
information on each next level option.
1. “Decimal Point”- If the user programs the Decimal Point to “OFF”, control display
will not show a decimal point on any vend price values. The factory default is
“ON”.
2. “Sounds”- If the user programs the Sounds to “OFF”, the control will not sound
the enunciator at the end of a wash cycle. The factory default is “ON”.
3. “Password”- If the user programs the password to any value other then 0000,
the control will prompt the user to enter a password (the programmed value)
before manual programming can be accessed. The factory default is “0000” (no
password).
a. Note that if the user forgets the Password, it can be reset to factory
default (no password), by performing a hard reset on the control. Please
refer to the appropriate section of this manual to understand how to
perform a hard reset.
b. The individual digits of the Password can be set by using the “Up” or
“Down” buttons to change the number that is flashing. Once the desired
number is chosen for a single digit, press the “Enter” button to move to
the next one. Once all four desired digits are chosen, the “Enter” button
must be held down for 3 seconds to confirm that the complete password
should be set.
4. “Language”- The control uses English for the default language of the customer
prompts. Alternatively, the user can choose Spanish, French, Malay, Italian, or
Greek for the customer display prompts. However, all other prompts, such as
Manual Programming, USB Programming and any Error Codes will still display in
English.
5. “Shift Hours”- This feature allows the user to shift the time used by the control
from the time kept internally by the control. The control uses a Real Time Clock
(RTC) to internally track the time and date. The RTC continues operation even if
the control loses external power. The RTC is set for Central Standard Time and
no daylight savings. Because the machine may be located in another time zone,
the user can choose to create an alternate time & date that tracks in parallel to
the RTC. When this alternate time is chosen, or shifted from the RTC, the
alternate time will be used to, for example, track error code occurrences and set
time-of-day pricing changes.
a. The hours in “SHIFT HOURS” can be set by using the “Up” or “Down”
buttons to change the number that is flashing. Once the desired hour shift
is chosen, press the “Enter” button to move to the minutes. Once the
hours and minute shift are both chosen, the “Enter” button must be held
down for 3 seconds to confirm that the complete shifted time is set.
6. “Time”- The control uses a Real Time Clock (RTC) to internally track the time and
date. The RTC continues operation even if the control loses external power. The
RTC is set for Central Standard Time and no daylight savings. However, if a
problem occurs and the RTC time is not accurate, it can be reset to the current
time using this option.

Dexter Laundry T-950 Specifications

General

Brand	Dexter Laundry
Model	T-950
Category	Washer
Language	English