Domino C Series User Manual

PROGRAMMING AND PRINTING
77091 Issue 2 November 2003 59
Adjusting the delay
The delay setting determines the time gap between the photocell being triggered
and the nozzle plate beginning to emit ink. Since the photocell is triggered by the
leading edge of the items on the conveyor, the larger the delay setting the further
along the side of the item each message will begin to print.
Delay is normally set for each individual message since different messages will be of
different lengths. Long messages may need shorter delay times than brief messages.
The delay value used will also depend on the speed of the conveyor - faster
conveyors may need lower delay times.
Press the key labelled:
The following screen will appear:
2 line LCD models:
4 line LCD models:
Small delay setting: message
printed close to the leading edge of
item
Small delay setting: message
printed close to the leading edge of
item
TEXT TEXT
For which msg
(* for all)?
For which message
Enter number or
press * for all

Domino C Series Specifications

General

Brand	Domino
Model	C Series
Category	Printer
Language	English