PROGRAMMING AND PRINTING
77091 Issue 2 November 2003 65
Setting Up a Second Password
The printer allows two passwords to be used. One password is set into the printer
at the factory and cannot be changed. The other can be set to the operator’s own
preference. When using the system, enter either password to access printer
functions (presuming that password protection has been set).
To maintain security, whenever the password is entered in order to access a printer
function, the password characters will not appear on the screen. Instead, a series of
ash marks will appear (e.g. ######).
To set up a second password press together the keys labelled:
At the prompt, type in the new password. Printer passwords can be up to six
characters in length using any alphanumeric characters. This new second password
will replace any password previously set.
When finished, press the ENTER key to store the new password in the printer’s
permanent memory.
+
To Next Page
Loading...
Need help?
General
