INSTALLATION
30 77091 Issue 2 November 2003
INSTALLATION
Where to Site the Printer
WARNINGS: (1)The printer must not be sited where there is a
risk of water splashing onto the machine. The
printer is not water-resistant.
(2)The printer must not be sited near a source of
static or electromagnetic radiation, such as
metal detectors or high current sealing
machines.
(3)The electricity supply to the printer must be of
constant voltage and current and must be free
from transient spikes and interference. Check
the voltage setting before switching on the
machine.
Before installing the system, check the shipment carefully, removing all packaging,
to ensure that all the ordered components have arrived and that there is no obvious
mechanical damage from shipping. Installation is not complicated, and should take
less than half an hour.
The printer is capable of exceptional print quality at high speed. The performance
of the system depends greatly on its proper installation. Contact your local
distributor or service technician for advice on installing the printer.
It is important to prepare the site carefully. Choose a suitable place for the printer
to be mounted to the conveyor frame. A level, straight sextion of conveyor is
required. If printing on both sides of the items, using more than one printer, both
sides of the printer must be easily accessibe for programming and maintenance.
To Next Page
Loading...
Need help?
General
