EasyManuals Logo
Home>Domino>Printer>C16

Domino C16 User Manual

Default Icon
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
INSTALLATION
77091 Issue 2 November 2003 43
Ensure the ink level is checked regularly (by pressing the ink level indicator switch
and looking through the window on the base unit door) since an exhausted ink
bottle will draw large quantities of air into the system. The process of changing
the ink supply will always cause some air bubbles to become lodged in the ink feed
tubes - these must be removed by priming the system.
Note: If the printer is not going to be used for periods of longer than three weeks, it is
recommended that to replace all the ink in the system with Domino flushing fluid for
the idle period.
Connecting the Print Head
There are two connections to the print head:
a black coiled power cable and a translucent
coiled ink supply tube fitted with a quick
disconnect (“QD”) plug.
Connect the power cable to the socket on
the left hand side of the print head (under
the ledge). The pins are arranged to prevent
incorrect insertion. Screw the cable firmly
in place.
Remove the shipping caps from the end of
the ink supply tube and the QD socket on
the right hand side of the print head.
Connect the QD plug by simply lining it up
with the socket and pressing it in place. A
“click” will be heard as the locking plate
secures the plug.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Domino C16 and is the answer not in the manual?

Domino C16 Specifications

General IconGeneral
BrandDomino
ModelC16
CategoryPrinter
LanguageEnglish

Related product manuals