PROGRAMMING AND PRINTING
48 77091 Issue 2 November 2003
The following screen will appear:
2 line LCD models:
4 line LCD models:
Press
to enable password protection or any other key to leave the option.
Setting the Clock
This option allows the current system time and date to be changed, and to set up
the rollover time (the time at which the date changes as far as each production line
is concerned.)
Note: Do not attempt to set the printer’s clock while printing is taking place.
It is important that the printer is given the correct current date and time before
date stamping or sell-by-dates can be printed. Once entered, the correct time will
remain in the printer even if the power is switched off.
Press the key labelled:
Enable password
again Y or N
Press Y to enable
the password, press
any other key to
leave it disabled
To Next Page
Loading...
Need help?
General
