16
Connections
Insert small bladed screwdriver
to release the fuse.
Figure 3-1, Power Entry Module
Line
Voltage
Fuse Rating Manufacturer Manufacturer Part No.
110-240V 1A, slow blow, 250Vac, ¼” x 1-1/4” Bel Fuse Inc. 3SB 1-R
Table 3-1, AC Line Fuse Information
3.2 Ground Connection
The rear panel GND ground screw (refer figures 2-2, 2-3 and 2-4) should be
connected to safety earth ground using #18 AWG or larger wire.