Field Description
Console
language
Select the language for the graphical user interface .
Date
formats
Date format used in the console
NET vol
(°C)
Select the temperature used for the temperature compensated volume calculations
Level Measurement units of the product and water height
Volume Measurement units of the product and water volume
Alarm
Settings
The alarm hysteresis textbox isused ONLY in when there isNO alarm. This is used when there is turbulence in
the tank. This is important for relay management.
In the examples below, Hysteresis is the value interval between the yellow and red lines.
Recommended setting: 10 mm
Leak
threshold
(liters)
Used for the Dynamic Tank Leak Detection function*. Defines the maximum leak rate per hour that can be
detected. A loss over that threshold will be considered as an unregistered sale and will abort the Dynamic Leak
test.
Recommended setting: 20 liters
*Tank Leak Detection: The console automatically starts a tank leak test (refer to the US EPA procedure) when
the tank is idle. The Leak Test can also be started manually from the Tank Status web page.
The system must have 2 hrs of continuous idle time to do a 0.2 gph tank test and 3 hrs of idle time to do a 0.1 gph
tank test.
The tank must be filled to a 50% minimum and the last tank delivery must have occurred at least 6 hours before
To Next Page
Loading...
Need help?
General
