Configure the Closing Time for up to four shifts (use the drop-down lists)
When complete, click the Save Shift Schedule button. Click Apply Settings to Console to complete the
procedure.
6.1.6 Fairbanks
The console can send information to a Fairbanks server through FTP if applicable. This information includes:
l Inventory stock levels
l Deliveries
l Alarms
l Pump transactions (if connected to a POS/FCC that uses the Gilbarco BCD protocol).
Field Description
Server The IP address of the server that will receive the files (given by the server administrator).
Folder
The folder in the server where the files are to be sent, provided by the server administrator (optional, can be
left blank)
User User name provided by the server administrator
Password Password provided by the server administrator
ID Console identifier. If set to 0, the FTP transfer gets disabled.
Port FTP port, provided by the server administrator
Interval How often the console will attempt to establish connection to the server in order to send the files
Transfer
mode
Active or Passive, info provided by the server administrator.
Enable SSL Activate for SSL connections
Click Save when you complete the Fairbanks tab configuration.
M2051-EU Rev.: 1 Dover Fueling Solutions
Page 25