Dräger X-act 7000 Technical Manual

Technical Manual | X-act
®
7000 43
Description | en
3.1.7.4 Completion
Once the measurement has been completed, the MicroTubes are once again
removed from the gas path and the result is shown in the display. The MicroTubes
are transported to the new operating position by the drive.
3.1.8 Settings
Press the softkey (graphic D/1) to open the menu and select “Login”.
The following configurations can be set and changed in this PIN-protected menu:
–Date
– Date format
–Time
–PIN
– Language
– Device reset
Standard password: 0001
3.1.9 Display
The display is broken down into 3 sections (graphic D/2) whose display varies
depending on the setting and device status.
Upper display section (graphic D/2a)
The time and battery charge status are always displayed.
The following icons may also be displayed:
45794
03:30
Select Language
Set PIN
Date & Time
Logout
Set Date Format
Battery is fully charged Battery is empty
10 of 10 unused Dräger Micro-
Tubes in the device, 10 mea-
surements possible
All Dräger MicroTubes used

Dräger X-act 7000 Specifications

General

Brand	Dräger
Model	X-act 7000
Category	Test Equipment
Language	English