46 Technical Manual | X-act
®
7000
en | Description
Warning:
Error:
3.2 Intended use
The Dräger X-act 7000 is used to determine gaseous compounds in the ambient
air. Depending on the Dräger MicroTubes used, the device measures the smallest
of concentrations of the corresponding substance, predominantly in the ppb range.
For sensor measurements, a system of sensors and hoses (graphic C/3) measuring
up to 45 meters in length may be connected to the device using the coupler
(graphic C/1) and the X-am pump (graphic C/2).
3.2.1 Restrictions of the intended use
The X-act 7000 is not suitable for measuring process gases and for leak detection.
4579045792
03:30
Remote Pump Test
Abort?
03:30
Pump Test failed
Remote Pump Test