87
Firmware & Open Source Software
Firmware Updates
Dremel recommends that firmware is updated whenever Dremel provides an update.
Dremel will provide firmware updates to improve performance and add additional features for
the laser cutter throughout the life of the product. The laser cutter will be able to obtain new
firmware by connecting the network connection (Ethernet or Wireless) to the Internet to allow
the firmware to check for new firmware updates. The laser cutter will automatically download
(in a background process) when a firmware update is available. The laser cutter will provide a
prompt on the LCD display to allow it to proceed with the update.
Open Source Software used in this Dremel product
This product contains software components that are licensed by the holder of the rights under
any version of the GNU General Public License (GPL), GNU Lesser General Public License
(LGPL) or any other open source software license which requires that source code be made
available. A complete machine-readable copy of the corresponding source code is available
by sending a written request to:
Dremel
Attn: Open Source Software Officer
P.O. Box 081126
Racine, WI USA 53408-1126
The request should include: (i) the name of the Dremel product, (ii) the serial number (if
applicable), (iii) the software version (if applicable), (iv) your name, (v) your company name (if
applicable) and (vi) your return mailing and email address (if available).
We may charge you a nominal fee to cover the cost of the physical media and distribution.
Send the request (i) within three (3) years of the date product was received that included the
software which is subject of your request or (ii) in the case of code licensed under the GPL
version 3 for as long as Dremel offers spare parts or customer support for that product.
Warranty regarding further use of the Open Source Software:
DREMEL provides no warranty for the Open Source Software programs contained in this
device, if such programs are used in any manner other than the program execution intended
by DREMEL. The licenses listed below define the warranty, if any, from the authors or
licensors of the Open Source Software. DREMEL specifically disclaims any warranties for
defects caused by altering any Open Source Software program or the product´s configuration.
You have no warranty claims against DREMEL in the event that the Open Source Software
infringes the intellectual property rights of a third party. Technical support, if any, will only be
provided for unmodified software.
To Next Page
Loading...
Need help?
General
