Dremel DIGILAB LC40 User Manual

11
GLOSSARY OF TERMS
RESOURCES
Term Definition
Air Assist
Air delivery system that helps to control flareups. Air is supplied by the Hex
Box™.
Alignment Laser
An additional laser diode whose beam results in a red dot that is used to
help align the mirrors.
Auto Array
A software function that creates a grid of the desired size by repeating the
selected image.
.bin File
A binary file format used to save and load workspace projects to and from a
computer.
Cut
Also called "vector", used for cutting through work piece. This function
requires a vector, or line file to execute.
Design Software
Graphics editing software used to create and manipulate images for laser
cutting and engraving.
Resource Description Location
Quick Start
Guide
Provides an illustrated walkthrough of
how to un-box the laser cutter and start
a job.
Printed version is located in
the box with the laser
cutter. It is also available on
digilab.dremel.com/support/
laser-support
Laser Cutter
LCD
Interface
Provides step-by-step instructions for
setting up the laser cutter. Also allows
control of the laser head, run recent
jobs, and adjust machine settings.
On the laser cutter machine
Dremel LC40
Control
Software
Provides the interface for setting up,
saving, and sending cutting and
engraving jobs to the laser cutter.
Enter the IP address of
the laser cutter into the
browser.
Dremel
Website
Access project inspiration and
downloads, Dremel product
information, and customer support.
dremel.com
DigiLab
Website
Access information about Dremel
DigiLab products, education projects,
and more.
digilab.dremel.com
Dremel
Customer
Support
Contact Dremel for product support,
maintenance, and service.
1-844-437-6533
dremel.com/digilab-support

Dremel DIGILAB LC40 Specifications

General

Brand	Dremel
Model	DIGILAB LC40
Category	Cutter
Language	English