EasyManuals Logo
Home>DSC>Cell Phone>PowerSeries Neo 3G2080E

DSC PowerSeries Neo 3G2080E User Manual

DSC PowerSeries Neo 3G2080E
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
HEX
Value
Offset
Hours
Standard
Abbreviation
Location
54 8.75 ACWST Australian Central Western Standard Time
55 9 KST Korea Standard Time
57 9.5 ACST Australian Central Standard Time
59 10 AEST Australian Eastern Standard Time
5B 10.5 LHST Lord Howe Standard Time
5D 11 VUT Vanuatu Time
5F 11.5 NFT Norfolk Island Time
61 12 NZST New Zealand Standard Time
64 12.75 CHAST Chatham Island Standard Time
65 13 TOT Tonga Time
69 14 LINT Line Island Time
70-FF N/A N/A N/A
[021] Account Code
Default (FFFFFF)
The account code is included when transmitting any events generated by the communicator. (e.g., panel absent trouble). It
is recommended that the account code be the same as the control panel account number. Valid range: 000001-FFFFFE. If
4-digit account codes are needed, the two lowest digits must be programmed as FF (e.g., Account 1234 is programmed
as:1234FF).
NOTE: Programming this section with all 0’s or F’s will cause a module configuration trouble.
NOTE: This section shall sync with panel option [310] with PowerSeries Neo panels version 1.00 or higher.
[022] Communications Format
Default (04)
Program 03 for Contact ID (CID). Program 04 for SIA. The module can be configured to send Events in SIA or CID format.
The SIA communication format follows the level 2 specifications of the SIA Digital Communication Standard - October 1997.
This format will send the account code along with its data transmission. The transmission will look similar to the following at
the receiver.
NOTE: This section shall sync with PowerSeries Neo panels version 1.00 or higher.
Example:
Nri0 ET001 where: N = New Event; ri0 = Partition/Area identifier; ET = Panel Absent Trouble; 001 = Zone 001.
Communications Reporting Codes
Table 9: Communications Reporting Codes
Event
SIA
Identifier
SIA
Reporting Code
CID
Qualifier
CID
Event
Code
CID
Reporting
Code
CID
User/Zone
[023] Panel Absent Trouble ET 0001 1 3 55 001
[024] Panel Absent Trouble Restore ER 0001 3 3 55 001
[026] Ethernet 1 Test Transmission RP 0001 1 6 A3 951
[027] Ethernet 2 Test Transmission RP 0002 1 6 A3 952
[028] Cellular 1 Test Transmission RP 0003 1 6 A3 955
[029] Cellular 2 Test Transmission RP 0004 1 6 A3 956
[030] FTC Restore YK 0001 3 3 54 001
26

Table of Contents

Other manuals for DSC PowerSeries Neo 3G2080E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DSC PowerSeries Neo 3G2080E and is the answer not in the manual?

DSC PowerSeries Neo 3G2080E Specifications

General IconGeneral
BrandDSC
ModelPowerSeries Neo 3G2080E
CategoryCell Phone
LanguageEnglish

Related product manuals