Ducati 999S User Manual

56
E
2
3
1
4
MAIN MAINTENANCE OPERATIONS
Removing the fairing
Some servicing operations need the motorcycle fairing to
be removed.
Warning
Firmly and properly secure all removed parts when
refitting them, otherwise some of them might suddenly
come off when riding and you may lose control of your
motorcycle.
Important
At reassembly always fit nylon washers when
tightening fastening screws, not to damage painted parts
and Plexiglas headlamp fairing.
Side body panels - biposto
Remove the body panels as follows. Using the Allen key
accommodated under the seat unscrew what follows:
the two quick fasteners (1) securing the body panels to
the brackets.
the two quick fasteners (2) securing the body panels to
the headlamp fairing.
the four frame quick fasteners (3).
the screw (4) joining the right and left body panels at the
bottom end.
fig. 48
Side body panels - monoposto
Remove the body panels as follows:
Remove the four quick fasteners (3) with their ring
securing the body panels to the frame.
On the right-hand side, gain access to the tool kit, take
the Allen key for the fairing and remove the following:
the two quick fasteners (1) securing the body panels to
the brackets.
the two quick fasteners (2) securing the body panels to
the headlamp fairing.
the screw (4) joining the right and left body panels at the
bottom end.

Ducati 999S Specifications

General

Displacement	998 cc
Transmission	6-speed
Rear Brakes	Single 240 mm disc, 2-piston caliper
Bore x Stroke	100 mm x 63.5 mm
Frame	Tubular steel trellis
Engine Type	L-twin, 4 valves per cylinder, Desmodromic
Front Suspension	Showa 43 mm fully adjustable upside-down fork
Rear Suspension	Fully adjustable Ohlins monoshock
Front Brakes	2 x 320 mm discs, 4-piston calipers
Fuel Capacity	15.5 liters
Fuel Injection	Marelli electronic fuel injection
Exhaust	2-1-2 system with catalytic converter
Torque	106 Nm @ 8, 000 rpm

Summary

General Information and Controls

Manual Overview and Warranty

Explains manual symbols, warranty terms, and general advice.

Motorcycle Controls Overview

Identifies the location and function of all motorcycle controls.

Instrument Panel and LCD Functions

Details the instrument panel, indicators, LCD functions, and parameter settings.

Ignition, Security, and Starting

Covers immobilizer, keys, code card, ignition switch, and starting procedures.

Operation and Adjustments

Riding Procedures and Recommendations

Covers running-in, pre-ride checks, starting, moving off, braking, and stopping.

Control Adjustments

Procedures for adjusting pedals, steering, suspension, and beam setting.

Main Components and Devices

Identifies and describes major components like steering damper, stands, and fuel filler.

Maintenance and Technical Data

Maintenance Operations Guide

Guides on fairing removal, fluid checks, lubrication, and bulb replacement.

Technical Specifications

Provides data on dimensions, weights, engine, transmission, brakes, and suspensions.

Electrical System and Fuses

Details the electric system components, wiring, and fuse box.

Safety, Emissions, and Records (USA)

Safety Warnings and Riding Practices

Essential advice for safe operation, protective apparel, and riding conditions.

Emissions Control and Warranty (USA)

Information on US/California emission systems, noise warranty, and legal rights.

Maintenance Record

Log for recording scheduled maintenance services.