Ducati 999S User Manual

75
E
Stop light (fig. 71)
To replace the stop and parking light bulbs, unscrew the
two screws (1) that secure the cover (2). The cover (2)
has two retaining pins on the inner face that hold the tail
light lens (3) in place. The bulb is of the bayonet-type:
press and twist anti-clockwise to remove. Fit the spare
bulb by pressing and turning clockwise until it locates
into its seat with an audible click. Refit any parts you
have removed.
Number plate light (fig. 72)
To expose the number plate light bulb, unscrew the two
retaining screws (4) securing the cover (5). Extract the
bulb and replace.
3
2
5
1
4
fig. 71
3
fig. 72

Ducati 999S Specifications

General

Displacement	998 cc
Transmission	6-speed
Rear Brakes	Single 240 mm disc, 2-piston caliper
Bore x Stroke	100 mm x 63.5 mm
Frame	Tubular steel trellis
Engine Type	L-twin, 4 valves per cylinder, Desmodromic
Front Suspension	Showa 43 mm fully adjustable upside-down fork
Rear Suspension	Fully adjustable Ohlins monoshock
Front Brakes	2 x 320 mm discs, 4-piston calipers
Fuel Capacity	15.5 liters
Fuel Injection	Marelli electronic fuel injection
Exhaust	2-1-2 system with catalytic converter
Torque	106 Nm @ 8, 000 rpm