Ducati 999S User Manual

88
E
Type:
34-4 pistons.
Friction material:
TOSHIBA TT 2172
Master cylinder type:
PR 18.
Rear brake (999/999S)
With fixed drilled steel disc.
Disc diameter:
240 mm
Hydraulically operated by a pedal on R.H. side.
Braking surface:
32 sq cm
Make:
BREMBO
Type:
34-2 pistons.
Friction material:
FERIT I/D 450 FF
Master cylinder type:
PS 11.
Warning
Brake fluid can dissolve paintwork and cause
severe eye and skin injuries in the event of accidental
spilling. Wash the affected area with abundant running
water.
Performance data
Maximum speed in any gear should be reached only after
a correct running-in period with the motorcycle properly
serviced at the recommended intervals.
Max. speed (rider alone):
265 Km/h (999)
270 Km/h (999S)
Spark plugs
Make:
CHAMPION
Type:
RG 4 HC (999/999S)
Brakes
Front brake (999/999S)
With double semi-floating drilled disc.
Material:
steel
Disc diameter:
320 mm
Hydraulically operated by a control lever on right
handlebar.
Braking surface:
79 sq cm
Make brake calipers:
BREMBO

Ducati 999S Specifications

General

Displacement	998 cc
Transmission	6-speed
Rear Brakes	Single 240 mm disc, 2-piston caliper
Bore x Stroke	100 mm x 63.5 mm
Frame	Tubular steel trellis
Engine Type	L-twin, 4 valves per cylinder, Desmodromic
Front Suspension	Showa 43 mm fully adjustable upside-down fork
Rear Suspension	Fully adjustable Ohlins monoshock
Front Brakes	2 x 320 mm discs, 4-piston calipers
Fuel Capacity	15.5 liters
Fuel Injection	Marelli electronic fuel injection
Exhaust	2-1-2 system with catalytic converter
Torque	106 Nm @ 8, 000 rpm