Ducati 999S User Manual

74
E
Front turn indicators (fig. 69)
Note
The rear-view mirror and incorporated turn indicator
are shown detached from the headlamp fairing to
simplify illustration.
Remove the screws (1) and detach the glass (2) from the
indicator/mirror support.
The bulb is of the bayonet-type: press and rotate anti-
clockwise to remove; fit the spare bulb by pressing and
turning clockwise until it clicks.
Refit the glass into the suitable slot in the indicator body
and tighten the screws (1).
Rear turn indicators (fig. 70)
To change the rear turn indicator bulbs, rotate indicator
body (3) by one fourth of a turn so that glass is upward
and extract it from indicator mount.
The bulb is of the bayonet-type: press and rotate anti-
clockwise to remove; fit the spare bulb by pressing and
turning clockwise until it clicks.
Refit indicator body (3) to its mount and rotate by one
fourth of a turn.
1
2
fig. 69
3
fig. 70

Ducati 999S Specifications

General

Displacement	998 cc
Transmission	6-speed
Rear Brakes	Single 240 mm disc, 2-piston caliper
Bore x Stroke	100 mm x 63.5 mm
Frame	Tubular steel trellis
Engine Type	L-twin, 4 valves per cylinder, Desmodromic
Front Suspension	Showa 43 mm fully adjustable upside-down fork
Rear Suspension	Fully adjustable Ohlins monoshock
Front Brakes	2 x 320 mm discs, 4-piston calipers
Fuel Capacity	15.5 liters
Fuel Injection	Marelli electronic fuel injection
Exhaust	2-1-2 system with catalytic converter
Torque	106 Nm @ 8, 000 rpm