Duplo DP - M420 User Manual

38
Loading Document in ADF
Available only when ADF installed
Load documents that consist of a series of sheets to be printed in the ADF. When one or more documents are
loaded in the ADF, mastermaking and printing are automatically repeated until the document tray is empty.
• ADF mode is automatically selected when a document is loaded in the ADF. The ADF then
takes priority over the document glass plate in the mastermaking process.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Align the document guide with the marks f
or
the size of document to be loaded in the ADF.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Place the document face-up in the document
tray
.
Mastermaking starts with the top document in the tray.
• Do not attempt to remove or add to the
documents in the document tray while
mastermaking and printing are in progress.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Loading Documents
IMPORTANT
IMPORTANT

Duplo DP - M420 Specifications

General

Brand	Duplo
Model	DP - M420
Category	All in One Printer
Language	English