Duplo DP - M420 User Manual

62
Adjusting Master Darkness
The master darkness (the level at which black and white are differentiated) can be adjusted in 3 steps.
Make the master more “dark” if the document is light, or “light” if the document is dark.
• Set the “Master Darkness” before making the master.
• If you adjust the master darkness, you must repeat the mastermaking process before
making prints.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press (FUNCTION SWITCH) ke
y. Press
(SELECT) ke
y several times to show the screen
at right.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press (FUNCTION SWITCH) ke
y.
The master darkness screen appears.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
There are two ways to return the darkness to
“NORMAL” as follows.
• Set the darkness to “NORMAL” in the same
procedure.
• Press (ALL CLEAR) key. In this case, all
settings are reset to standard mode
(a page 26).
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press (SELECT) ke
y several times to display
the desired master darkness.
Each time (SELECT) key is pressed, the display of the
LCD panel changes as follows.
“LIGHT” →
“DARK”
→
“NORMAL”
Press (FUNCTION SWITCH) ke
y.
1
2.MASTER DARKNESS
NORMAL
2.MASTER DARKNESS
DARK
DARK
The master darkness is selected, and press SELECT key
several times the standard screen appears.
2.MASTER DARKNESS
IMPORTANT
REFERENCE

Duplo DP - M420 Specifications

General

Brand	Duplo
Model	DP - M420
Category	All in One Printer
Language	English