EN
18 2016/11SE
14. Disposable bag
Using the disposable suction bag on the
VCCart�
• Place the standard guide adapter (40) onto
the basic unit from above�
• Secure the standard adapter from below us-
ing two screws (41) and flat washers�
23
24
40
41
• Fix the screws (42), spacers and nuts in place
on the adapter�
• Slide the adapter approx� 10 cm along the
rails provided under the VCCart and lock in
place�
• Place the protective caps (43) over the
screws�
42
43
25
• Slide the collector mount (44) onto the adapt-
er guide�
• The collector should now hang in the adapter
guide�
Before every application, carry out a vis-
ual check of the complete appliance in-
cluding the collector� If the collector
shows any signs of fatigue (small
cracks) because of frequent disinfection
or sterilisation, it should be replaced as
soon as possible�
44
49
To Next Page
Loading...
Need help?
General
