EN
6 2016/11SE
1
3. Warnings and Symbols
The following terminology and symbols are used
in these Installation and Operating Instructions
to denote especially important information:
Information and/or mandatory regu-
lations or prohibitions for the pre-
vention of personal injury or sub-
stantial property damage.
Information and/or instructions or prohi-
bitions regarding personal safety or ex-
tensive material damage
Warning - dangerous electrical
voltage
Steam sterilise at 134 °C
Comply with the operating instructions
3.1 Model identification plate
The model identification plate can be found on
the underside of the appliance near the power
supply connection�
Order no� / Type no�
Serial no�
Batch code
Observe accompanying documentation!
Manufacturer
Type BF application
Protection class II
IPX1 Protection against infiltration of harmful
damp (e�g� water droplets)
To Next Page
Loading...
Need help?
General
