EN
24 2016/11SE
16.5 Checking and testing the
functioning
Frequent reprocessing in this way can have a
slight effect on plastic and rubber parts, such as
collector, collector lid, handle and suction hose�
The end of the product's life cycle is determined
by the amount of wear and tear or damage dur-
ing use� Always check plastic and rubber parts
and replace where necessary, disposing of
damaged parts as appropriate� Before disposal,
the parts should be disinfected and sterilised�
16.6 Storage
Store individual parts protected against
contamination�
16.7 Disinfection and cleaning of
the appliance surfaces
Before disinfection and cleaning of the
appliance, unplug at the mains and re-
move all power�
• Always clean the surfaces using a damp cloth�
Do not use a dry cloth�
• In the case of coarse organic contamination,
pre-clean with cellulose�
• As a surface disinfectant, we recommend a
material compatible disinfectant in accord-
ance with the usual dental health standards,
e�g� Dürr Dental FD 322, FD 366 or FD 350
disinfection wipes�
To Next Page
Loading...
Need help?
General
