P-164000341 8-10 kVA, 50/60 Hz (1-phase input) &
8-15 kVA, 50/60 Hz (3-phase input)
3
Revision 1 User's Guide
2 Introduction
The product described in this manual is an Uninterruptible Power System (UPS) intended for marine
applications. It is a true online, continuous duty, double conversion, static state, single- or three-phase
system, providing conditioned and uninterruptible AC power to protect the customer’s load from all
nine different power failures.
2.1 System description
The UPS units are used to provide back-up power for safety, propulsion and cruising related systems,
protect sensitive IT equipment and prevent loss of valuable electronic information, minimise
equipment downtime, and minimise the adverse effect on different equipment due to unexpected
power problems.
The UPS system continually monitors incoming electrical power and removes the surges,
spikes, sags, and other irregularities that are inherent in commercial utility power. Working with
a vessel‘s electrical system, the UPS system supplies clean, consistent power that sensitive
electronic equipment requires for reliable operation. During brownouts, blackouts, and other power
interruptions, batteries provide emergency power to safeguard operation.
The UPS system is housed in single freestanding cabinets. The cabinets line up and match in style
and colour, and have safety shields behind the doors for hazardous voltage protection.
To Next Page
Loading...
Need help?
General
