65
Copyright © 2022 Eaton Corporation plc. All rights reserved.
Figure 6-35: Service reminder settings page
Click the “Fan Replacement Reminder” button to enter the following interface, where you can set
the time interval of the service reminder and enable/disable the service reminder. If disabled, the
reminder will not be displayed when it expires, and the timing will not be reset. If enabled, the
reminder will be actuated when the set time expires. When the setting is completed and the “Save”
button is clicked, the reminder date and enable/disable status will appear on the interface.
The operation method is the same for the other three service reminder pages.
Figure 6-36: Fan replacement reminder settings
To Next Page
Loading...
Need help?
General
