Chapter 2
Preparation
Copyright © 2008-2010 Eaton Corporation. All Rights Reserved.
IPN 997-00012-68D February 2010
7
Chapter 2
Preparation
Overview
Topic Page
General 7
Battery Precautions 8
Wiring Requirements 8
Inspecting the Equipment and Reporting Damage 8
General
1 Before installing and using the Matrix Telecom Inverter System, read all instructions and
cautionary markings on the equipment and all appropriate sections of this guide. Be sure to
read all instructions and cautionary markings for any equipment attached to this unit.
2 This unit is designed for indoor use only. Do not expose the equipment to rain, snow, or
spray.
3 To reduce the risk of fire hazard, do not cover or obstruct the ventilation openings. Do not
install the equipment in a zero-clearance compartment.
4 Use only attachments recommended or sold by the manufacturer. Doing otherwise may
result in a risk of fire, electric shock, or other injury.
5 To avoid a risk of fire and electric shock, make sure that existing wiring is in good
condition and that wire is not undersized. Do not operate the equipment with damaged or
substandard wiring.
6 Do not operate the equipment if it has been damaged in any way.
To Next Page
Loading...
Need help?
General