2018.12.12
© 2017 Eaton. All rights reserved
42
TRSM0940 Service Procedures | VCS/VMS Auxiliary Section Removal and Disassembly – In Chassis
VCS/VMS Auxiliary Section Removal and Disassembly – In Chassis
Special Instructions
The following procedure covers the removal and disassem-
bly of the Auxiliary Section with the transmission remaining
in the chassis.
If the transmission is removed fr
om the truck refer to the
“VCS/VMS Auxiliary Section Removal and Disa
ssembly” on
page 44.
Special Tools
• RR1002TR – Counter Shaft Support Tools
• Support jack
Component Identification