PRESENTATION
NEW TECHNOLOGY: A NEW DISHWASHER DESIGNED USING THE MOST ADVANCED
COMPUTER TECHNOLOGY AND BUILT USING THE LATEST INDUSTRIAL
TECHNOLOGY.
RESULT:
The technological and production solutions used in the production of the new dishwasher, together with
concerted efforts on the part of the design team, have resulted in the creation of a truly innovative range of
appliances that will meet the demands of a market that is in continuous evolution.
MAIN CHARACTERISTICS:
STRUCTURE:
- Convertible modular design in three versions: Free-standing, Fully built-in, Partially built-in (control panel
visible).
- Monolithic load-bearing base constructed in sound-absorbing material.
- Removable lateral panels.
- Flexible styling to suit the various aesthetic requirements.
HYDRAULIC SYSTEM:
- Newly-designed integrated hydraulic circuit.
- New integrated sump (in base) allowing simultaneous or alternate washing.
- Softening of regeneration water up to 120° French - 70° German.
- Precision setting of regeneration (10 levels).
- Mechanical adjustment of regeneration level (or via software for electronic models).
- Reduction of quantity of washing water (-0.5 litres per fill) with respect to previous dishwashers.
ELECTRICAL SYSTEM:
- Integrated dual-function pump motor (washing and drain).
- Newly-designed timers / electronic circuit boards (to optimize performance and consumption).
- Vented drying system (for top-of-the-range electronic models).
SAFETY AND CONTROL CIRCUITS:
- Measurement of washing temperature using thermostats or temperature sensor (electronic models).
- Measurement of water fill level by pressure switch.
- Anti-leakage devices: Anti-overflow, Anti-flooding, Acquastop.
- Overheating protection: safety thermostat, time-out.
- Door locking system.
- Total software-controlled functional protection (electronic models only).
CONVENIENCE:
- Constructed entirely using recyclable materials.
- Exceptionally silent operation thanks to the use of new materials and new technologies.
- Ease of installation, whether free-standing or built-in.
- New frontal adjustment system for rear feet (top-of-the-range built-in models).
SERVICE:
- Ease of access to all components thanks to the removable lateral panels and to the careful positioning of
all major parts.
- 5 -