ALARMS
(ITRONIC "HL")
The intervention of one of the safety systems is signalled in the DIGIT window by an Alarm Code in the form
of a flashing letter.
If an Alarm Code is displayed in the DIGIT window while a programme is in execution, the dishwasher stops
(i.e. the cycle is interrupted) and all functions are disabled, including all the buttons with the exception of the
"ON/OFF" button.
SAFETY SYSTEM ALARM CODE
Time-out WATER FILL
A
Time-out SUPPLEMENTARY FILL C
Time-out PRESSURE SWITCH "EMPTY" (waiting for correct temperature) F
Time-out TEMPERATURE SENSOR L
Time-out WATER HEATING H
Time-out PRESSURE SWITCH "EMPTY" (end of drain) P
RESET / CANCEL ALARM
To reset or cancel an alarm condition, press the "ON/OFF" button to switch off the appliance.
Press the "ON/OFF" button again; the appliance returns to the Programme Selection phase, and the washing
cycle can be re-selected.
If the fault persists, the appliance returns to the
ALARM condition.
- 40 -
To Next Page
Loading...
Need help?
General
