Emerson CSI 9420 User Manual

Appendix B
Product certifications
Topics covered in this appendix:
• Approved manufacturing location
• Wireless certifications
• Hazardous locations certificates
Note
For specific device certifications, always refer to the product nameplate and markings on the device.
B.1 Approved manufacturing location
Emerson Process Management - MHM, Knoxville, Tennessee, USA
B.2 Wireless certifications
Telecommunications compliance
All wireless devices require certification to ensure that they adhere to regulations
regarding the use of the RF spectrum. Nearly every country requires this type of product
certification. Emerson works with governmental agencies around the world to supply fully
compliant products and remove the risk of violating country directives or laws governing
wireless device usage.
Radio and Telecommunications Terminal Equipment Directive (R&TTE)(1999/5/EC)
Emerson Process Management complies with the R&TTE Directive.
FCC and IC approvals
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may
cause undesired operation.
• This device must be installed to ensure a minimum antenna separation distance of
20 cm from all persons.
Telecommunication compliance
2.4 GHz CSI 9420
Product certifications
MHM-97408, Rev 15 125

Emerson CSI 9420 Specifications

General

Brand	Emerson
Model	CSI 9420
Category	Transmitter
Language	English