1.2 Overview
The manual
This Reference Manual applies to the 2.4 GHz WirelessHART version of the CSI 9420 for use
with the Smart Power Module unless otherwise specified. It is optimized for use with the
most recent device and software revisions (AMS Suite: Machinery Health Manager v5.61
and AMS Suite: Intelligent Device Manager v12.5).
Use this manual to install, operate, and maintain the CSI 9420 Wireless Vibration
Transmitter.
The transmitter
The CSI 9420 Wireless Vibration Transmitter is an installation-ready solution that monitors
vibration and temperature in hard-to-reach locations. It also provides a variety of
transmitter and sensor configurations.
Some of its features include:
• Support for up to 4 process variables with up to 3 user configurable alerts for each
process variable
• Support for storage of Waveform/Spectrum directly in AMS Machinery Manager
• Wireless output with >99% data reliability, delivering rich HART data, protected by
industry leading security (when operated as part of a well-formed network)
• Local operator interface with integral LCD that conveniently displays measured
values and diagnostics
• Simple and easy installation, used today for robust installations
Introduction
2 MHM-97408, Rev 15
To Next Page
Loading...
Need help?
General
