1592040000 XR70T EN v1.1 2019.07.09 XR70T 37/40
19. APPENDIX
19.1 TOOLS
19.1.1 XH-REP
The XH-REP remote display enables the visualization of a second temperature
value. A special cable must be used to connect an XH-REP to the controller
(code DD200002 00). The remote display usage will disable the serial
communication.
The X-MOD is a motion detection sensor that allows to detect the proximity of
customers or service staff. 5Vdc power supply version must be used. The
X_MOD usage will disable the serial communication.
WIZMATE software, used in combination with the XJ485USB, allows to manage
the configuration of the controller.
The HOT-KEY is used for a quick and easy upload (from device to HOT-KEY) or
download (from HOT-KEY to device) of the parameter map. The 64K version
must be used (code DK00000300).
19.1.5 USB TO RS485 CONVERTER
XJ485USB is an optically isolated converter with 2.5kV maximum voltage isolation
on data channels. It has a small plastic box with 2 indication LEDs, RX and TX,
to quickly monitor the network communication. Power supply directly from USB
port.
To Next Page
Loading...
Need help?
General
