Emerson EV3 Series User Manual

32 AGL_Sol_EV3_E_Rev_02
Appendix 5: Advanced user interface
An advanced user interface is available to control the drive without any other kind of controller. Its
main functions are as follows:
▪ Drive control
▪ Drive configuration
▪ Changing default parameters like the Modbus address (default set to 45)
▪ Real-time Modbus data analysis
▪ Updating drive software (DSP & EEPROM)
DISCLAIMER
1. The contents of this publication are presented for informational purposes only and are not to be
construed as warranties or guarantees, express or implied, regarding the products or services
described herein or their use or applicability.
2. Emerson Climate Technologies GmbH and/or its affiliates (collectively "Emerson"), as
applicable, reserve the right to modify the design or specifications of such products at any time
without notice.
3. Emerson does not assume responsibility for the selection, use or maintenance of any product.
Responsibility for proper selection, use and maintenance of any Emerson product remains solely
with the purchaser or end user.
4. Emerson does not assume responsibility for possible typographic errors contained in this
publication.

Emerson EV3 Series Specifications

General

Brand	Emerson
Model	EV3 Series
Category	DC Drives
Language	English