Emerson Micro Motion User Manual

B Device profile
B.1 Object classes
Table B-1 lists and describes all object classes supported by the EtherNet/IP Module.
Table B-1: Object classes and descriptions
Object Class ID Optional/
required
Description
Identity 0x01 Required Contains information
that uniquely describes
the device
Message Router 0x02 Required Tracks the accessibility
of the object classes
and instances
Assembly 0x04 Required Contains a list of
attributes that data
can be written to (sink)
or read from (source)
Port 0xF4 Required
TCP/IP Interface 0xF5 Required Groups settings related
to TCP/IP.
Ethernet Link 0xF6 Required Groups diagnostic
information for the
Ethernet interface
Diagnostic 0xAA Optional Groups diagnostic
information for the
fieldbus interface
Parameter Data Input
Mapping
0xBO Optional Used for acyclic access
to input data
Parameter Data
Output Mapping
0xB1 Optional Used for acyclic acces
to output data
B.2 Object details
B.2.1 Identity Object, Class 01h
This object provides identification of and general information about the device. It contains
informational attributes that uniquely describe the device.
Example: The use of attributes Vendor ID, Device Type, Product Code, and Serial Number
together uniquely identify this device.
User Guide
Device profile
MMI-20019808 January 2019
User Guide 35

Emerson Micro Motion Specifications

General

Brand	Emerson
Model	Micro Motion
Category	Measuring Instruments
Language	English