Emerson NetSure 501 AA0 User Manual

32 Chapter 4 Use Of Monitoring Module M500D
Parameter Range Default Value description
within the delay, the rectifier is regarded normal; otherwise, the rectifier will be
locked out and auto-restart function will be disabled
4.7.10 System Settings
Users of different password levels have different authorities.
1. For the user level password (“1” by default), there are 2 related pages, as shown below:
Adress
:
1
Text
：
Chinese
CommMode: Modem
Baud
:
9600
Set Date
:

2004-05-01
Set Time
:
17
：
30
：
30
Use “▼” or “▲” to select one page or one of the parameters, and “◄” or “►” to select the parameter value. Press
“ENT” to confirm and save.
When the “CommMode” is “MODEM” or “EEM-M”, the “CallBack Number” and “CallBack Num” (how many times
should callback be made) should be set.
CallBack Num:

5
CallBack Set:
Code1
▼
CallBack Number:

01234567901234
56789
Use “▼” or “▲” to change the number, and “◄” or “►” to move the cursor left or right. Press “ENT” to confirm.
2. For the operator level password (by default: 2) or administrator level password (by default: 640275), you can see
the following pages, besides the pages above, as shown below:
Init PWD
:
N
Init Param
:
N
System Type
:
48V/5
0A/300/NO
NE
There will be a prompt when resetting the system:
Notice:
All Param lost!
ENT Continue,
ESC Quit.
3. For administrator level password (by default: 640275), you can see the following pages, besides all those above,
as shown below:
Change Password:
Code1
Con Alarm Voice:
1Hour
Serial
:
12345689101112
SW Ver
:
1.0
Set
Enable
:
Y
You can change the value of the parameter “Change Password” and press “ENT” to confirm.
NetSure 501 A50, NetSure 501 AA0, NetSure 701 A51 19-Inch Subrack Power Supply System User Manual

Emerson NetSure 501 AA0 Specifications

General

Brand	Emerson
Model	NetSure 501 AA0
Category	Power Supply
Language	English