1 Introduction
1.1 Product overview
The Emerson Smart Wireless Gateway 1410 (Gateway) connects WirelessHART
®
self-
organizing networks with host systems and data applications. Modbus
®
communications
over RS-485 or Ethernet provide universal integration and system interoperability. The
optional OPC or EtherNet/IP
™
functionality from the Gateway offers a means to connect to
newer systems and applications while providing a richer set of data.
The Smart Wireless Gateway provides industry leading security, scalability, and data
reliability. Layered security ensures that the network stays protected. Additional devices
can be added at any time. There is no need to configure communication paths because
the Gateway manages the network automatically. This feature also ensures that
WirelessHART field devices have the most reliable path to send data.
What is included?
The box containing the Gateway will contain several items essential to the complete
installation and operation of the Gateway.
• Smart Wireless Gateway
• Quick Start Guide
• Software pack, 2 disk set
• Informational side label for IP address
• Basic antenna (if no remote antenna is required)
• Terminal block (black)
If an optional remote antenna has been ordered, it will be in a separate box containing:
• Remote mount antenna
• Mounting hardware
• Lightning arrestor
• Cable (50- or 25-ft. [15,2 or 7,62 m] in length)
• Coaxial sealant tape
• Right angle SMA to N-Type adapter cable
1.2 Using this manual
This manual provides information to help install, configure, operate, and maintain the
Gateway.
Introduction introduces the product and describes what components may be found in the
box. It also includes details for services and support as well as return and disposal of the
product.
Reference Manual
Introduction
00809-0200-4410 September 2020
Emerson.com/Rosemount 5
To Next Page
Loading...
Need help?
General
