Configuration describes how to connect to the Gateway for the first time and what
settings should be configured before placing it on a live control network. It is important to
note that some Gateways are used in stand-alone applications and do not reside on a
network. In these cases, it is still important to configure the items outlined in this section.
Installation describes how to properly mount the Gateway and make electrical
connections, including electrical wiring, grounding, and host system connections. This
section also describes how to mount the optional remote antenna.
Commissioning describes the installation and setup of the optional software included with
the Smart Wireless Gateway. This software will aid in secure host integration as well as
wireless field device configuration.
Operation and Maintenance describes how to connect the Gateway to a host system and
integrate data gathered from the field device network. It covers network architectures,
security, and data mapping.
Troubleshooting provides troubleshooting tips as well as information to contact technical
support over the phone or through email.
Glossary defines terms used throughout this manual or that appear in the web interface of
the Smart Wireless Gateway.
Specifications and Reference Data and Product Certifications provide additional and more
specific information on a variety of subjects including Product Specifications and Product
Certifications.
1.3 Product recycling/disposal
Recycling of equipment and packaging should be taken into consideration and disposed of
in accordance with local and national legislation/regulations.
Introduction Reference Manual
September 2020 00809-0200-4410
6 Emerson.com/Rosemount
To Next Page
Loading...
Need help?
General
