Envoy Installation and Operation
2013 Enphase Energy Inc. 141-00011 Rev 05
2. Register the Envoy
Register the Envoy at the beginning of
the PV installation.
a. Use your previously issued
username and password to
log in to in Enlighten.
If you haven’t registered, go to
www.enphase.com and click
Enlighten Login.
b. At the installer dashboard,
click Add a New System.
If you have already registered
the site, find the system under
Installations in Progress.
c. Under System, enter the
system name, type and
installer reference (optional).
d. Under Owner, enter the
name, email, and phone.
e. Under Location, enter the
country, installation site
address information.
f. Under Envoy, enter the Envoy
serial number
NOTE: If you have selected a
country other than the US, or if
you select Hawaii as the state
under Location, the Grid
Profile menu appears.
g. If required, select the
appropriate profile from the
Grid Profile menu. Skip this
step in the continental US
because the factory settings
meet requirements.
h. Under Modules, enter total
number of modules, type, etc.
For information on Grid Profiles or on
using the Envoy Interface to check or
set the Grid Profile, see “Change or
View the Grid Profile” on page 38.
i. Click Save to submit the form.
You will receive a confirmation
message: “Activation Created
Successfully.”
To Next Page
Loading...
Need help?
General
