Epilog Laser FusionPro 16000 User Manual

Center Engraving
The Center Engraving feature allows you to define the center of your artwork as the primary reference
point (Home Position) of your engraving or cutting. The Center Engraving feature has been designed to
be used in conjunction with the red dot pointer, using the Jog feature on the Fusion Pro Control Panel.
Center engraving diers from standard printing, where the upper le corner of the page and the upper
le corner of the laser table define your primary reference point.
• You can identify a Center Engraving job at the laser when you see a target icon at the end
of the job name.
If you get a Position Error reading on the display screen, your artwork is going to go outside
of your available work space.
• There are six choices for Center Engraving:
• Center-Center
• Le-Center
• Right-Center
• Center-Top
• Center-Bottom
• Top Le
• Top Right
• Bottom Le
• Bottom Right
• Custom
- 116 -
SECTION 8: SYSTEM FEATURES

Epilog Laser FusionPro 16000 Specifications

General

Brand	Epilog Laser
Model	FusionPro 16000
Category	Engraver
Language	English