Epilog Laser FusionPro 16000 User Manual

SECTION 13: SPECIFICATIONS
Fusion Pro Laser Technical Specifications
Fusion Pro 32 (CO2) Fusion Pro 32 (Fiber) Fusion Pro 48 (CO2) Fusion Pro 48 (Fiber)
Maximum
Engraving Area
32” x 20” (812 x 508 mm) 48” x 36” (1219 x 914 mm)
Max Material
Thickness
12.25” (311 mm) (2” lens) 11.25” (286 mm) (3”
lens)
12.25” (311 mm) (2” lens) 11.25” (286 mm) (3” lens)
Dual Source 11.25” (286 mm) (3” lens) Dual Source 11.25” (286 mm) (3” lens)
Laser Source
Wattages
50, 60, 80, or 120 watt,
CO2, air-cooled, 10.6
micrometers
30 or 50 watt, Fiber
Laser. Air cooled,
includes
collimator. 1064 nm.
Beam
quality: M2 < 1.1.
50, 60, 80, or 120 watt,
CO2, air-cooled, 10.6
micrometers
30 or 50 watt, Fiber
Laser. Air cooled,
includes
collimator. 1064 nm.
Beam
quality: M2 < 1.1.
Standard
Features
Radiance High Definition Optics (CO2), Air Assist, Red Dot Pointer, relocatable Home Position,
LED lighting, integrated floor stand, brushless servo motors, Super-Silent Cooling Fans, Joy-
stick controls, removable exhaust plenum.
Dual Source Fusion Pro: Available with combination of 50, 60, 80 or 120 watt CO2 and 30 or 50
watt Fiber.
Intelligent
Memory Buer
Multiple files up to 1 GB. Rolling buer allows files of any size.
Operating Modes Optimized Raster, Vector and Combined modes.
Motion Control
System
High-speed, continuous-loop, brushless DC servo motors using rotary encoding technology
for precise positioning.
X-axis Bearings Ground and polished, stainless steel, Teflon coated, self-lubricating bearings. Dual blocks on
X-axis for greater rigidity
Belts Advanced B-style Kevlar belts (X-axis) and steel cord (y-axis).
Resolution Fully-flexible and user-controlled from 75 to 1200 DPI.
Speed and
Power Control
(engraving depth)
Computer-controlled in .001 increments up to 100%. Color mapping feature links Speed,
Power, Frequency, Raster/Vector mode, Air Assist, On/O settings to any RGB color.
Print Inteace 10Base-T Ethernet, or USB. Compatible with Windows 7/8/10.
Size (W x D x H) 54.6” x 34.2” x 42”
(1387 x 869 x 1067 mm)
70.6” x 51.3” x 42.75”
(1794 x 1304 x 1086 mm)
Pedestal removed: 34” H (863 mm)
Weight 400 lbs (182 kg) 650 lbs (295 kg)
Electrical
Requirements
110 to 240 volts, 50 or 60 Hz, single phase. 240 volts, 50 or 60 Hz, single phase, 15 amp AC.
Exhaust
Requirements
735 CFM total 735 CFM total
Exhaust Ports One output Port 4” (102 mm) Two output ports 4” (102 mm)
Table Exhaust Additional port for dedicated exhaust through table, 4” (102 mm)
Laser System
Classification
Class 2 Laser Product - 1 mW CW Maximum 600-700 nm.
Technical specifications and product configurations subject to change without notice.
- 197 -

Epilog Laser FusionPro 16000 Specifications

General

Brand	Epilog Laser
Model	FusionPro 16000
Category	Engraver
Language	English