14
Operator's instructions
1. General
Wheeled chassis frame
The diesel engine, chassis, dust collector, hydraulic system, air system and boom sys-
tem are mounted on the wagon frame.
The 4 wheels are driven by two steering axles with integrated brake.
The body covers the diesel engine, the compressor, the different lubrication tanks, the
valves and the hydraulic hoses. Inspection hatches facilitate access to the different
machine components. All the hatches lock in the open
position with a pneumatic spring.
The dust collector is mounted at the back of the rig on the right-hand side.
Power pack
This hydraulic drill rig is powered by a turbocharged, water-cooled diesel engine.
The diesel engine is equipped with a monitoring system that includes automatic shut-
down functions.
The drilling carriage is driven by 2 steering axles connected to each other by a
universal joint and powered by a hydraulic motor.
The hydraulic pumps and the compressor are driven by a diesel engine.
Boom system
The boom system consists of inner/outer boom bodies, boom head, feed holder and
associated hydraulic cylinders. The boom system is controlled by directional valves
for positioning the feed with the rock drill at different distances and directions.
Dust collector
The hydraulically driven dust collector features automatic cleaning and consists of a
filter unit, pre-separator, suction fan and suction hose.
Electrical system
The 24 V electrical system is supplied with current by an alternator and two batteries.
The electrical system comprises starting equipment, work lighting, electric controls
and safety devices.
To Next Page
Loading...
Need help?
General
